Boom Or Section Cal - Raven Viper Pro Installation & Operation Manual

Chapter 4
Pr SGain (Pressure System Gain)
The default setting for the Sgain value is 100. To adjust the system aggressiveness, enter a value between 1
and 999 as necessary.
Note:
It is recommended to increase or decrease the current value in increments of 10 or less when
making adjustments to the Sgain setting. If the new value does not produce significant or notable
changes in the system response, increments of 20 may be used.
Increase the Sgain value if the observed product pressure increases too slowly or if the system takes a long
time to reach a set standby pressure or rate input change. If the system is consistently over shooting a set
standby pressure or oscillating around a target rate, decrease the Sgain value until the system stabilizes.

Boom or Section Cal

The boom setup process detailed in this section is required to configure the field computer to the application
equipment or implement. This procedure sets the overall width used for guidance of the machine as well as
boom or implement section widths used for control of product application.
From the main screen, touch Menu, then Setup and Boom to display the Boom Setup screen.
1.
Touch the Overall Width field and use the on-screen keypad to enter the machine or implement swath
2.
width. The overall width is the machine width used for Guidance control without fence row nozzles or foam
markers. This value must be entered using the units displayed at the bottom of the Boom Setup screen.
Touch the Number of Boom Sections value and enter the corresponding number of the highest boom
3.
sense connector used by the application system.
Note:
The total number of booms may include "skipped" sections or boom sense wires not connected in
some cases. Raven boom sense wires are color coded as follows:
46
Section Lead Wire
Number Color
Black
1.
Brown
2.
Blue
3.
Black/White
4.
Brown/White
5.
Blue/White
6.
White/Black
7.
White/Brown
8.
Section Lead Wire
Number Color
White/Blue
9.
Pink
10.
Yellow/White
11.
Green/White
12.
Red/White
13.
White/Yellow
14.
White/Green
15.
White/Red
16.
Viper Pro Installation & Operation Manual