Table of Contents
Advertisement
Chapter 8
GPS Status Screens
The GPS Status area provides a quick reference for DGPS signals transmitted to the Viper Pro from the
connected DGPS receiver. To view additional information and access features for the DPGS information on the
Viper Pro field computer, touch the GPS Status area on the main screen.
The GPS Status screen displays information provided by the DGPS receiver. This screen may also display
information to help address issues with DGPS reception.
Reverse Sense. The reverse sense feature enables the field computer to detect when the vehicle is backing
up. With the reverse sensing feature turned off, the Viper Pro will always display any vehicle motion in the
forward direction.
Note:
The reverse sense button will not be displayed if an optional SmarTrax system is connected to the
CANbus system. Refer to the SmarTrax operation manual for information on reverse sense with
these systems.
Touch the Rev Sense button to display the Reverse Sense screen. Review the on-screen feature description
and select the desired mode of operation. When the Rev Sense feature is enabled, the field computer will
144
or
Viper Pro Installation & Operation Manual
Advertisement
Table of Contents
Troubleshooting
