Profiles - Raven Viper Pro Installation & Operation Manual

Chapter 4

Profiles

Once the initial set up is complete for the machine settings, it is recommended to save a machine profile. The
profile stores many of the settings previously set during the initial set up procedure as well as any
communication port settings, customized section configurations and guidance feature settings.
If the Viper Pro will be used with different machines or application equipment, profiles allow the operator to
quickly re-configure the field computer for the specific application and equipment type.
Note:
Profiles do not store any information contained in the CAN nodes.
Saving Profile Information
Select Menu, then Setup, Local, Profile, and Save Profile. The Save Profile screen opens.
1.
Using the screen keyboard, enter a name for the profile.
2.
Press OK. A confirmation screen displays.
3.
Note:
Before saving a profile, make sure that all settings are correct.
Press OK. Viper saves the profile information to the system.
4.
Loading a Saved Profile
Select Menu, then Setup, Local, Profile, and Load Profile. The Select Profile screen displays.
1.
Select a profile from the list.
2.
Press OK. A confirmation screen displays.
3.
Press OK. Viper restarts with the new profile loaded.
4.
50 Viper Pro Installation & Operation Manual