Table of Contents
Advertisement
To activate the cleanout feature during a field operation:
The field computer will display a prompt when the last product in a chain has been exhausted.
1.
Note:
Review the Product Chain Prompts section on page 126 for details on product chain prompts
displayed during field operations.
Touch 'OK' to acknowledge the chaining prompt and return to the Viper Pro main screen.
Touch within the Application Rates area to display the Application Control screen.
2.
or
Select the 'Cleanout' option along the right side of the display to enable the cleanout feature.
3.
Touch the "Cleanout" button.
4.
Each product bin in the chain will begin application when the product chain is activated for the remainder of
5.
the application.
Product Chain Display Data
If a product chain is enabled during a job, information for the chained products will be available by touching the
Display Data button. Touch within the data area displayed until the Chain Info area is displayed. For more
information on the Display Data area, see the Display Data section on page 57.
Manual No. 016-0171-122 Rev. I
Product Chaining
127
Advertisement
Table of Contents
Troubleshooting
