Raven Viper Pro Installation & Operation Manual page 258

Appendix B
Touch the Dump Product button. The Viper Pro will display the Product Dump Warning prompt.
8.
Note:
Make sure the belt is full of product before touching OK. If the belt is not full, the test results will be
inaccurate.
If the weight of dumped product will be used, be sure a weight box or loader is in place and that no
product will be spilled on the ground.
Touch the OK button to begin dumping product. The Spreader Constant Calibration screen will appear. The
9.
belt will begin to move and the product will begin dumping until the system calculates that the Desired
Weight for the test has been dumped.
Note:
A warning will appear if the spreader switch is not turned on. Be sure the spreader switch is on to
allow product to dump.
248
WARNING
Product will be expelled when the OK button is
selected. Be sure to warn or clear anyone in the
vicinity of operation of the belt and/or fans
during the test. Be sure to disable spinners or
fans before starting the test.
WARNING
To avoid serious injury or even death, keep
away from belt(s), spinners, and/or fans while
the machine is in operation.
Viper Pro Installation & Operation Manual