CHAPTER
4
Install the UltraGlide Sensors
Mount the Boom Sensors
Sensor mounting locations may be influenced by the boom configuration. Determine the appropriate location
for mounting the sensors on the boom, ensuring the sensors will not interfere with or be damaged while folding
or unfolding the booms. The outer boom sensors should be mounted outside of the boom breakaway.
Note:
When mounting two sensors per boom, the outside sensor should be mounted inside of the boom
breakaway.
Boom Sensor Mounting Locations
FIGURE 1.
Manual No. 016-0230-009 Rev B
S ensors
C h a p t e r 4
Inside Boom Sensor
(Booms Folded)
Outside Boom Sensor
17