Raven Viper Pro Installation & Operation Manual page 70

Chapter 4
Product Control Status Display
The Product Control Status of the Raven serial control console or the Raven CAN system is displayed in this
area.
The status indicator displays a red 'X' if communication with the Raven serial control console or CANbus
system is not available. A yellow 'caution' symbol is displayed if the Viper Pro detects a problem with the
CANbus system such as an alarm condition. The status indicator will display a green 'thumbs-up' during
normal operation.
Touch the Product Control Status or indicator to view the CAN Controller Status screen and access the Node
Setup screens when connected to a Raven CANbus system.
Note:
See the Controller Status Screen section on page 62 for an overview of the settings and
information areas displayed on the CAN Controller Status screen. Refer to Review Chapter 8,
Advanced Settings and Features, for more information on the Product Control status and using the
CAN Controller Status screens on the Viper Pro field computer.
SmarTrax Status Area and Steering Indicator
If an optional SmarTrax or SmartSteer system is installed with the Viper Pro, the status of the system will be
displayed in this area.
If the SmarTrax system is engaged, the steering indicator will display a green steering wheel with the 'A' as
shown above. When the SmarTrax system is disengaged, the steering wheel will be grey and no A will appear.
Note:
Refer to the SmarTrax or SmartSteer Calibration and Operation Manual for additional information.
60
or
Viper Pro Installation & Operation Manual