Raven Viper Pro Installation & Operation Manual page 201

Misc Folder Sub-folders
The misc folder contains job reports and files which are not job specific. Several sub-folders are contained in
the misc folder to help organize this information. The following information is contained in the sub-folders.
AccuBoom Sub-folder. The AccuBoom sub-folder can be used to upload or download no-spray zone
templates that have been set up for specific fields. Once these templates are transferred to the Viper Pro,
they can be used when starting a new job in the selected field.
AutoBoom Alarms Sub-folder: The AutoBoom Alarms sub-folder can be used to download AutoBoom alarm
information. This information will only be available on the Viper Pro if the alarm recording function is
enabled in AutoBoom.
BoundaryShp. The boundaryShp folder contains any shapefiles for field boundaries created using GIS
software and transferred to the Viper Pro field computer.
Note:
Field Boundaries created using the Viper Pro are saved as a part of the job file.
Clone. The clone sub-folder will only appear on the USB drive if a clone of the Viper Pro has been created.
Clones may be used as "restore points" to quickly and easily reset the Viper Pro field computer to a
previous set up. A clone will contain the following files contained within the Viper Pro file structure:
•
Coverage Maps
•
Prescription Maps
•
Streetmaps
•
Scout Maps
•
A-B Lines
•
RAD folder containing as-applied RAD files or .jdf files
Refer to Clone or Restore Settings section on page 199 for instructions on creating or restoring clone files.
GuideArchive Sub-folder. The guide Archive sub-folder can be used to transfer A-B guidance lines from one
machine to another.
Profiles Sub-folder. The profiles sub-folder stores previously configured machine profiles for different
machine configurations.
Reports Sub-folder. The reports sub-folder contains specific job reports which the field computer generates
during file maintenance. The Viper Pro creates application reports in both a shapfile format and bitmap
(.bmp) files.
Shapefile reports for a job will have a .shp, .shx, .prj and .dbf file for each product applied in the job and may
require specialized software to view the reports.
Bitmap reports are generated for each product applied during the job and may be viewed or printed on any
computer without special software tools.
RxMaps Sub-folder. The 'rxMaps' sub-folder is used to transfer prescription maps to the Viper Pro. These
prescription maps must be in the proper shapefile format used by the Viper Pro.
Streetmaps Sub-folder. The streetmaps sub-folder can be used to load streetmap shapefiles onto the Viper
Pro. The streetmaps must be in the proper shapefile format used by the Viper Pro.
Note:
Once the streetmap files are loaded into the Viper, the streetmap must still be loaded into the Viper
Pro system memory.
Manual No. 016-0171-122 Rev. I
File Maintenance and Editing Reports
•
Job files
•
Report files
•
Boom Configuration
•
AccuBoom Configuration
•
Comm Port settings
191