Feature Settings Area - Raven Viper Pro Installation & Operation Manual

Chapter 8

Feature Settings Area

The information displayed in the Feature Settings area is an overview of the following settings for the selected
product control node.
•
Dual Flow %/FER Cal
•
Off Rate %
•
Low Tank
•
Low Limit
•
Flow/Shaft Alarm
To modify the feature or alarm settings for the above features, touch within the feature settings area on the
CAN Controller Status screen.
Note:
Before changing any of the feature or alarm settings, be sure to select the correct product node or
control channel by touching the corresponding radio button displayed at the top of the feature
settings area.
Node Feature Settings Screen (Page 1)
Touch within the Feature Settings area to view the first screen of settings for the selected product node or
control channel.
Note:
Touch the Next button to access additional alarm and feature settings for the selected product
node or control channel.
134
•
Vacuum/Bin Alarm
•
Decimal Shift
•
Zero Speed Shutoff
•
Display Smoothing
•
Agitator
•
Ratio Rate
Viper Pro Installation & Operation Manual
•
Low PSI Alarm
•
Max PSI Alarm
•
Standby Pressure Enable
•
Dual Loop Control
•
Smart Control
•