Table of Contents
Advertisement
Advanced Settings and Features
Miscellaneous Settings Area
The information displayed in the Miscellaneous area is an overview of the settings and current system status.
The Miscellaneous area displays an overview of several current system settings for the system.
Note:
Touching within the Miscellaneous area will display the Miscellaneous Settings screen.
The following information displays are for reference and monitoring purposes only:
Fan/Pump RPM Display. The fan or pump RPM is a display only. This read out displays the fan RPM if a fan
sensor is being used with a granular application or a pump RPM if a pump sensor is equipped for a liquid
application.
Speed Display. Speed is a display only. The speed shown in this area is the current ground speed of the
vehicle or the entered self test speed. See the Using the Calibration Assistance section on page 226 for
information on entering and using the self test speed feature.
Miscellaneous Settings Screen
Touch within the Miscellaneous area on the CAN Controller Status screen to display the Miscellaneous
Settings screen.
Speed Sensor and Cal. This is the type of speed sensor from which the field computer is receiving speed
signal and the calibration value entered for the selected sensor. Review the Speed Sensor Type and Cal
section on page 39 for details on the sensor type setting or the speed cal value. Refer to the Speed Cal section
on page 225 for information on using the Calibration Assistance feature to refine the current speed cal value.
Manual No. 016-0171-122 Rev. I
131
Advertisement
Table of Contents
Troubleshooting
