Machine Control Settings - Raven Viper Pro Installation & Operation Manual

Chapter 5

Machine Control Settings

Touch the Next button on the Assign Recommendations to Channel screen to proceed with the job set up
1.
process and display the Machine Control Settings screen.
The Viper Pro will automatically enter the current date and time as a default job name.
2.
To simplify working with job files, or if job files will be accessed at a later date to finish product application, it
is recommended to rename the job. Use the on-screen keyboard to enter a job name.
Select the guidance pattern best suited to the field area and application. Refer to the Swath Guidance
3.
Patterns section on page 110 for details on the available patterns and using guidance during a job.
Select one of the following AccuBoom mapping modes for the job:
4.
•
Standard AccuBoom - This method requires no action or additional setup by the operator. The
operator simply begins to apply product to the field and the Viper Pro monitors the coverage map
and will turn sections off if the boom enters into a previously applied area.
•
Create AccuBoom No-Spray Map - This method allows the operator to define spray/no-spray
zones within the field. This method is typically used if no previous map has been created and the
operator wants to define the field boundaries and other boundaries such as waterways, well
heads, etc.
•
Load AccuBoom No-Spray Map - This method allows the operator to load a previously created
zone map. Select the desired map from the list of available AccuBoom maps currently stored on
the Viper Pro.
•
Map From Field Boundary - This method allows the Viper Pro to generate a no-spray boundary
map from the current field boundary.
Note:
See Chapter 9, Using AccuBoom™, for details on setting up the AccuBoom feature.
Touch OK to start the job, Prev to return to previous job settings screens or Cancel to return to the main
5.
screen without beginning the configured job.
Note:
If the job is cancelled, all job settings and selections will need to be reselected if the job is
restarted.
If the field computer is enabled to receive web notifications via the Slingshot server, a prompt or
dialogue may be displayed after the Start Viper button is selected and the Main screen is
displayed. Refer to the Wireless File Transfer section on page 193 for more information.
76 Viper Pro Installation & Operation Manual