Job Error Messages; Variable Rate Control (Vrc) Error Messages - Raven Viper Pro Installation & Operation Manual

Chapter 12

Job Error Messages

Issue
Open New Job error
No GPS Coverage
Warning: You must
have GPS coverage
if you start a non-
VRCjob.
Missing Product
Information: No
Product Name
Entered
Job is opened in
View mode only.
You must set up the
section information
in the Setup menu
You have not set up
all of the products
for this job
You must select at
least 1 section for
this product
The Section
Settings for this job
do not match your
current section
setup. Cannot add
to this job.

Variable Rate Control (VRC) Error Messages

Issue
Browse Rx Files
VRC must be
selected in order to
enter prescription
information
No VRC Products
210
Possible Cause
• For non-VRC (Variable
Rate Control) jobs,
DGPS coverage must be
available before starting
the job
• Displays when starting a
job without a GPS signal
• No product name
entered
• Existing job was started
in View mode only. No
changes can be saved.
• When starting a job, this
message displays if the
sections have not been
setup
• Information for all of the
products has not been
entered during the job
setup process.
• Every product in the
system must have at
least one section
assigned to it.
• When adding to an
existing job, all section
settings must match
exactly the section
configuration when the
job was originally started.
Possible Cause
• VRC must be selected in
order to enter
prescription information
• VRC was not selected
during the product setup
• There are no more
selections to make
Solution
• Check for GPS signal.
• Check for GPS Signal.
• Enter a least one character for a product name.
• Close the job and restart in 'Add to Job' mode.
• Configure the section information in the Setup menu.
• Make sure that all products have an assigned product
name.
• Using the Boom Select option, check at least one
section for the product.
• Re-configure the section setup to match the
configuration when the job was originally started.
Solution
• Select VRC in the Product Setup screen.
• Select VRC in the Product Setup screen.
• Touch OK to start the job.
Viper Pro Installation & Operation Manual