Raven Viper Pro Installation & Operation Manual page 46

Chapter 4
Select one of control channels currently assigned to the product controller node and touch within the
3.
Product Control Settings area.
The first node settings screen for the selected control channel will be displayed. Touch the Next button
4.
along the right side of the screen to display the second node settings screen.
Touch the displayed valve cal value. Using the on-screen keyboard, enter a valve cal value of '900#' where
5.
# is the desired number of control channels assigned to the product controller node.
For example, enter a value of '9005' in the valve cal to enable all five control channels on the air cart node.
Touch the OK button until the Viper Pro main screen is displayed.
6.
Select the Menu button in the lower, right corner of the display and select the Exit, Exit to Menu options.
7.
When the Program Selection Menu screen displays, select the Sprayer/Spreader option to restart the Viper
8.
Pro application. The CAN Initialization Results screen will display again.
Verify that the appropriate control channels are displayed before touching the Start Viper button. Review
9.
the Configuring a Product Controller Node section on page 35 to disable control channels on the product
controller node.
36 Viper Pro Installation & Operation Manual