Console Calibration; Calculating "Boom Cal - Raven SCS-330 Installation & Service Manual

CONSOLE CALIBRATION

1.

CALCULATING "BOOM CAL"

1) 1)
1) 1) 1) Broadcast Spraying:
Calculate the width of each boom in inches [cm] by multiplying the number of tips
times the spacing.
programming the Console.
2) 2) 2) 2) 2) Band Spraying:
Calculate the width of each boom in inches [cm] by multiplying the number of tips
by the spacing. Calculate the Adjusted Applied Rate by multiplying the Broadcast
Rate by Band Width in inches [cm] divided by Spacing in inches [cm].
EXAMPLE: EXAMPLE:
EXAMPLE: EXAMPLE: EXAMPLE: Broadcast Rate
Spacing
Band Width
Adjusted Applied Rate
Write these boom widths down for future reference when
FIGURE 7
= 20 GPA [200 lit/ha]
= 40 inches [100 cm]
= 14 inches [40 cm]
=
=
=
9
GPA x Band Width
Spacing
20 x 14 = 7 GPA
40
[200] x [40] = [80 lit/ha]
[100]