Table of Contents
Advertisement
d)
After desired offset value is set, depress
e)
Depress
key to exit the offset menu.
2.
CALCULATING "SPEED CAL"
1)
Depress
"SPEd".
Right DATA display will show "on" or "oFF".
2)
Momentarily depress
3)
Depress
4)
While driving the vehicle at normal operating speed, depress the
keys to match the speed displayed in the DATA display to the speedometer
of the truck.
5)
When matched, depress
calibrated.
6)
Depress
NOTE: This is not an exact reading. For a more accurate calibration or for radar
speed calibration refer to Appendix 1 for "CALCULATING SPEED CAL".
to return to the ANTI-ICE HIGH OFFSET or depress any other
until the LIQ display shows "CAL". The left DATA display will show
to turn CAL speed "on".
.
and depress
and record value for future reference.
. LOW OFFSET is now set.
to turn CAL speed "oFF" when
13
and
Advertisement
Table of Contents
