Table of Contents
Advertisement
Model IFP-2100/ECS Installation Manual
6.2.6
Communicator Options
Communicator options provides the configuration for reporting events to a central station.
1.
From the main menu.
2.
Select 6 for Network Programming.
3.
Press 6 to enter Communicator Options menu.
6.2.6.1 Communicator Assignments
Each panel on the IFP-2100/ECS network specifies which network communicator is used for reporting. The
network communicator capability of the IFP-2100/ECS system allows all panels to use the same communicator
providing an economical solution for reducing the number of paths required for reporting purposes. A
communicator is specified by panel number. The network communicators will be used to report events according
to the communicator report table.
6.2.6.2 Communicator Miscellaneous
When using the SIA reporting format, the communicator sends information according to the SIA Reporting
Type. The selections for this option are:
1.
pi modifier (default)
2.
Panel ID
6.2.6.3 Receiver Configuration
The IFP-2100/ECS network can report events to as many as 68 receivers. See Appendix D for panel/receiver
relationship numbers. Each receiver can be assigned reporting credentials. When using a format that supports
phone numbers, it can be up to forty digits long.
1.
From the main menu.
2.
Select 6 for Network Programming.
3.
Press 6 to enter Communicator Options menu.
4.
Select 3 for Receiver Configuration.
5.
Select Panel to Program and press ENTER.
6.
Enter the receiver number that you want to report to. The receiver numbers available will correspond with
what panel number you entered. Receiver numbers are populated based on panel number and audited to
allow only the 4 appropriate receivers. See Appendix D for receiver number.
Available Format choices are:
.
Reporting Format
Contact ID
SIA500
SIA8
SIA20
Ethernet
Cellular
eVance
6-5
LS10143-001SK-E
Advertisement
Table of Contents
Troubleshooting
