Event Mapping - Honeywell IFP-2100 Installation And Operation Manual

Model IFP-2100/ECS Installation Manual
8.2.3

Event Mapping

There are 11 types of Zone events, 14 types of Panel events, and 40 types of Site events that can be mapped (see
Table 8-1). For each event type, you can activate the output groups with specific output patterns. Mapping
examples are shown in Figure 8-4, Figure 8-5, & Figure 8-6.
System
Manual Pull Alarm
Water Flow Alarm
Detector Alarm
(heat or smoke detectors)
Zone Aux 1 Alarm
Zone Aux 2 Alarm
Interlock Alert
Interlock Release
Pre-Alarm
Fire Supervisory
Status Point
CO Alarm
CO Supervisory
Trouble
Status Point Active
Table 8-1: Event Types
Zone
System Aux 1 Alarm
System Aux 2 Alarm
SBUS Expander Trouble
SBUS Class A Trouble
SLC Loop Trouble
AC Loss Trouble
Battery Trouble
Ground Fault Trouble
Phone Line Trouble
Reporting Account Trouble
Printer Trouble
Aux Power Trouble
System Switch Trouble
Output Group Trouble
8-7
Panel
Fire Drill
General Fire Alarm
General Fire Supervisory
General Fire Pre-Alarm
LOC ECS 1-8 Alarm
General ECS Alarm
General ECS Supervisory
Point ECS 1-8 Alarm
General Trouble
Site Silenced
Voice Aux In 1-8 Alarm
F1 Key Active
F2 Key Active
F3 Key Active
F4 Key Active
Voice Aux in 1-2
System Mic Active
Background Music
LS10143-001SK-E
Site