Table of Contents
Advertisement
LS10143-001SK-E
¾-inch plywood to the concrete surface and then attach the RBB or AB-55 cabinet to
the plywood.
•
If using the battery cable extenders provided (P/N 140643), mount the RBB or AB-55
cabinet no more than 18" away from the main control panel cabinet. This will ensure
that the battery cables reach the battery terminals.
2.
Connect the main control panel battery cables to the battery cable extenders as shown in Figure 4-6.
Figure 4-6 Splicing Control panel Battery Cable to RBB or AB-55 Battery Cable Extenders
Cabinet
Mounting Holes
Figure 4-5 RBB or AB-55 Cabinet Mounting Holes
4-4
Control Panel Installation
Advertisement
Table of Contents
Troubleshooting
