5880 Led I/O Module; 5880 Board Layout; Facp Connection - Honeywell IFP-2100 Installation And Operation Manual

Model IFP-2100/ECS Installation Manual

4.11 5880 LED I/O Module

The 5880 is an LED driver board that can be used in a wide variety of applications, including as an interface with
most customized floor plan annunciator boards. The 5880 can drive up to 40 LEDs and has one PZT controller.
The 5880 also has eight inputs for dry contact monitoring. The following sub-sections describe hardware
installation. Refer to Section 9 for programming information.
4.11.1

5880 Board Layout

Figure 4-37 shows the locations of screw terminals for connection to the panel and contact monitor wiring, pin
connectors for connecting LEDs and the DIP switch for selecting an SBUS ID number for the 5880.
4.11.2

FACP Connection

The 5880 connects to the panel via the SBUS. Make connections as shown in Figure 4-38. After the 5880 is
Dry Contact Inputs
SBUS Connection
Figure 4-37 5880 Board Layout
4-27
SBUS Address
DIP Switch
LS10143-001SK-E