Lcd Display; Banner; Menu System; Main Menu Overview - Honeywell IFP-2100 Installation And Operation Manual

Analog/addressable fire system emergency communication system
Hide thumbs Also See for IFP-2100:
Table of Contents

Advertisement

LS10143-001SK-E
10.2.1

LCD Display

The control panel LCD displays system messages, annunciates alarms, supervisories and troubles, provides
status information, and prompts for input. These messages can be up to 160 characters, displaying over four lines
of 40 characters each. Annunciator keys beep when they are pressed.
10.2.2

Banner

The banner is the message that displays on the control panel when the system is in normal mode (no alarm or
trouble condition exists and menus are not in use). A customize message can be created that will display instead
of the internal (default) message. See Section 9.7 for information on editing the banner.
Text of
Internal Banner
Custom Banner
Example

10.2.2.1 Single Key Acknowledge

This feature allows the user to press the ACK and display the oldest un-acknowledged event in the system.
Pressing ACK again will acknowledge the event, then display the next oldest un-acknowledged event without
pressing the arrow keys.
10.3

Menu System

The control panel is easy to operate from the Main Menu. To view the Main Menu press the ENTER or right
arrow key on the control panel or remote annunciator. The Main Menu will appear as shown in Section 10.3.1.
Select the desired option. You will be prompted for as access code if required.
The control panel supports up to 20 access codes. The profile for each access code (or user) can be modified
through the network programming option (see Section 6.2.5 for access code programming).
10.3.1

Main Menu Overview

The chart below is a brief overview of the Main Menu. These options are described in greater detail throughout
this section of the manual.
Main Menu Options
1- System Tests
2- Point Functions
3- Event History
Figure 10-2 Banner Display Examples
Access to Fire Drill, Indicator Test, Walk Tests, Communicator Test, Clear History Buffer, Manual
AlarmNet Registration and Manual Communicator Reset.
Enable/disable points, Point Status, SLC Single Device Locator, SLC Multiple Device Locator, and
I/O Point Control.
Display event history on the LCD. See Section 10.4.3 for more information.
Description
10-2
System Operation

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ifp-2100ecsRfp-2100

Table of Contents