Table of Contents
Advertisement
LS10143-001SK-E
4.
From the list that displays, select the 5824 module you want to configure.
5.
Press right arrow twice to skip over the Enter Module ID and Enter Module Name options. A screen similar
to the one shown in Figure 4-36 will display.
6.
Select options for the printer as needed for your installation. Most printers are parallel.
Note: When setting Monitor Printer to "Yes" the system defaults to printing only for the connected panels site.
Use HFSS Honeywell Fire Software Suite to configure the 5824 to print for multiple sites.
7.
If you are using a serial printer, use the next screen to select serial port options as required for your printer.
Refer to your printer manual if you need more information.
Figure 4-36 Selecting Printer and Output Port Options
Option
Baud Rate:
Data Bits:
Stop Bits:
Parity:
Select yes if printer should be supervised
for paper and of line conditions
Select type of printer
Parallel or Serial.
Defaulted to No
Select "Yes" for event logging
Choices
75 - 19200
5 - 8
.5, 1, 2
None, Even, Odd
4-26
Control Panel Installation
Advertisement
Table of Contents
Troubleshooting
