Two Wire Detectors - Honeywell IFP-2100 Installation And Operation Manual

LS10143-001SK-E
Manufacturer
RSSR-24MCC
RSSWPA-2475W
RSSWPA-24MCCH
RSSWPG-24MCCH
RSSWPR-24MCCH
RSSWP-2475W
RSSWP-2475C
RSSWP-24MCWH
ZRS-MCWH
ZRS-24MCC
ZRS-24MCCH
MB-G6-24
MB-G10-24
Wheelock
(cont.)
MB-G6-12
MB-G10-12
MIZ-24-R
MT-12/24-R
MT4-12/24
ZRS-MCW
MTWPR-24MCCH
NH-12/24R
HSR
HSW
STR
STW
HNR
A.2

Two Wire Detectors

Table A-2 lists two-wire smoke detectors that are compatible with the fire control panel. The table is organized
by manufacturer. The columns show the number of detectors per loop that can be used.
Note: The maximum number of smoke detectors per zone is determined by both the current draw and the imped-
ance of the smoke detector. If too many smoke detectors are used on any zone, false alarms could occur.
Do not mix different models of detectors on any zone; false alarms could occur.
Control unit Smoke Reset Time must be programmed for a number greater than or equal to the maximum
Table A-1 Compatible Notification Appliances
Model Audio
X
X
X
X
Identifier
Operating voltage Range
Visual
X Multi Candela Strobe
X Strobe Weatherproof
X Strobe Weatherproof
X Strobe Weatherproof
X Strobe Weatherproof
X Strobe Weatherproof
X Strobe Weatherproof
X Strobe Weatherproof
X Strobe
X Strobe
X Strobe
Motor Bell
Motor Bell
Motor Bell
Motor Bell
Mini Horn
X Multi-tone Horn
X Multi-tone Horn
X Strobe
X Multi-tone Horn Strobe
Horn
X Horn Strobe
X Horn Strobe
X Strobe
X Strobe
X Horn
IFP-2100/ECS
24H
17.1 - 27.3 VDC
8
Type