Logical Names For Files - HEIDENHAIN iTNC 530 HSCI Technical Manual

9.7.4 Logical names for files

Group Entry
NCPATH
PLCEDIT
NCEDIT
RUNPGM
RUNDATUM
SIMPGM
SIMDATUM
SIMTOOL
RUNBRKPGM
SIMBRKPGM
MDIPGM
TCHPATH
OEM
TABCMA
MODEHELP
PLCMAIN
PLCPWM
PLCEVENTS
PLCERRTAB
WMAT
TMAT
MPFILE
Your own entry
July 2013
Instead of a permanent file name, you can also enter logical names in PLC
modules, such as PS S">OEM.PLCMAIN".
Syntax: >Group.name
Name of the entry
Group name (NCPATH or OEM)
Identifier for logical name
Examples
>NCPATH.NCEDIT:
The iTNC transfers the complete name and path of the file that is currently
selected in the editing mode.
>OEM.PLCMAIN:
The iTNC transfers the complete name and path of the PLC program that was
entered in the OEM.SYS file with the command PLCMAIN.
List of the logical names:
Meaning
Selected file in the PLC Programming mode
Selected file in the Programming and Editing mode
Selected file in the Program Run mode
Selected datum table in the Program Run mode
Selected file in the Test Run mode
Selected datum table in the Program Test mode
Selected tool table in the Program Test mode
Target file in the block scan in the Program Run mode
Target file in the block scan in the Program Test mode
Selected file in the Positioning with Manual Data Input operating
mode
Selected datum table for manual probing
Active compensation table
Active help file
Active PLC main program
Active PLC commissioning program for digital axes
Active event list for spawn command
Active PLC error message list (PET)
Active tool material file
Active workpiece material file
Active machine parameter list
In the OEM.SYS file you can indicate the desired file names with
path behind your own entry.
For example: HUGO=TNC:\HUGO\TEST.H
9.7 Program Creation
1757