Module 9304 Copy Columns P1 To P5 To The Pocket Table - HEIDENHAIN iTNC 530 HSCI Technical Manual

1584
Error code:
Marker Value Meaning
M4203 0 Selection complete
1 Error code in W1022
W1022 1 Line in the pocket table could not be found
2 Invalid magazine number
3 Invalid mode
4 Invalid tool number or type
6 Tool number is already contained in the pocket table
20 Module was not called in a submit or spawn job
36 File error in the tool or pocket table
45 Module execution canceled, see return value for error

Module 9304 Copy columns P1 to P5 to the pocket table

Module 9304 transfers the contents of columns P1 to P5 from the pocket table
to the defined double-word address.
Call:
PS B/W/D/K <Magazine number>
PS B/W/D/K <Pocket number>
PS B/W/D/K <Double-word address>
CM 9304
Error code:
Marker Value Meaning
M4203 0 Columns copied
1 Error code in W1022
W1022 1 Invalid pocket number
2 Invalid magazine number
4 Invalid double-word address
20 Module was not called in a submit or spawn job
36 File error in pocket table
HEIDENHAIN Technical Manual iTNC 530 HSCI