Reading In And Out Of Individual Files Or Directories - HEIDENHAIN iTNC 530 Service Manual

Hide thumbs Also See for iTNC 530:

Table of Contents

16.3 Reading In and Out of Individual Files or Directories

Introduction

Connection setup

Read files from the

Information on setting data interfaces and reading in and out of data

(e.g., TNCserver operation) can be found in the User's Manual for the iTNC 530.

Establish conntection to the iTNC 530 by means of TNCremoNT

--> see "Connection Setup" on page 16 – 247.

If this does not work, please check the connecting cable and the settings!

Select the upper screen (laptop/PC contents) the target directory. --> Double click the

requested directory. --> The path information appears in the blue bar atop.

In the lower screen window (TNC contents), select the directory containing the file you wish

to download. In example PLC:\MP --> Double click the requested directory. --> The path

information appears in the blue bar atop.

To change the partiction click the blue bar with the path information.

To change to the PLC partition, enter PLC: and subsequently the PLC code number.

HEIDENHAIN Service Manual iTNC 530