Network Settings For Internet Access - HEIDENHAIN iTNC 530 HSCI Technical Manual

Hide thumbs Also See for iTNC 530 HSCI:

Table of Contents

Other possible

Settings for Internet access (proxy) and remote maintenance:

Telemaintenance

Network settings for Internet access

With HeROS 5, the control can access the Internet. After entering the code

number NET123, you will find the settings for Internet access on a tab in the

Network settings window. These settings are used for remote maintenance

and as default settings by the control's web browser (Firefox). However,

you can also use your own program-specific settings to configure the web

Direct connection to Internet / NAT

The control forwards Internet inquiries to the default gateway

and from there they must be forwarded through network

address translation (e.g. if a direct connection to a modem is

These settings are made by your network specialist.

Enter the address of the Internet router in the network

Enter the port number

Function reserved for future expansion

The network in which the control is connected must be protected by the

integrated browser Firefox against the downloading of viruses and malware.

The same applies to access to contents of the Internet or other networks. The

protective measures for this network are the responsibility of the machine tool

builder and the respective network administrator, for example through a

HEIDENHAIN Technical Manual iTNC 530 HSCI