HEIDENHAIN iTNC 530 HSCI Technical Manual page 1877

Screen Screen button /
button / soft key
soft key
The following screen buttons are available in the Network window:
The selected network drive is connected.
Connect
Activate/Deactivate automatic connection of the selected network drive.
Auto
Configure and add a new network drive:
Add
Define Name
Type
Define Share
Windows users
July 2013
Meaning
Drive name:

Enter a volume name for the network connection. The device
name entered here is displayed at the iTNC in the program
management for the mounted network. Only capital letters are
allowed, and the name must end with a colon (":").
Volume ID:

Information for distinguishing between several identical
network drives that are to be accessed with different user
names, for example.
Choose the type of network share.
CIFS/SMB: Windows share or Samba server share

NFS: Unix share

Server name:

Network name or IP address of the computer or server to be
connected. Slash ("/") or colon (":") are not allowed.
Share name:

Colon (":") is not allowed.
• Connecting via NFS:
UNIX directory that is to be mounted. Pay attention to
capitalization when entering the path name.
• Connecting via CIFS:
Enter the share name of the directory.
Windows User:

The user name and password are required for connecting to a
Windows network. Enter your personal Windows user name or
a generally valid access to the network.
Ask for password?

This setting defines whether the password is requested when
the drive is connected (indicated by check mark). If a password
is requested during connection setup, automatic connection
(automount) of the network drive is not possible.
Password:

The user name and password are required for connecting to a
Windows network. Enter your personal Windows password or
a generally valid access to the network (max. 80 characters).
Password verification:

Repeat the password you have entered.
10.3 Connecting the iTNC to the Network
1877