HEIDENHAIN iTNC 530 HSCI Technical Manual page 1726

Group Group
name number
ID....
Cycle parameters
30
Data from the tool table
50
1726
System data System data
number index
NR.... IDX....
1 –
2 –
3 –
4 –
5 –
6 –
7 –
8 –
9 –
10 –
11 –
12 –
13 –
14 –
15 –
52 <no.>
1 Tool no.
2 Tool no.
3 Tool no.
4 Tool no.
5 Tool no.
6 Tool no.
7 Tool no.
8 Tool no.
9 Tool no.
10 Tool no.
11 Tool no.
12 Tool no.
13 Tool no.
14 Tool no.
15 Tool no.
System datum
Set-up clearance
Hole depth / milling depth
Infeed depth
Feed rate for plunging
First side length of pocket
Second side length of pocket
First side length of slot
Second side length of slot
Radius of circular pocket
Feed rate for milling
Rotational direction of the milling path
Dwell time
Thread pitch
Finishing allowance
Roughing angle
Interrogation whether Q-parameter
number <no.> contains a string or
numerical value:
0 = tool number
1 = tool name
Tool length L
Tool radius R
Tool radius R2
Oversize for tool length DL
Tool radius oversize DR
Tool radius oversize DR2
Tool locked TL
0 = Not locked, 1 = Locked
Number of the replacement tool RT
Maximum tool age TIME1
Maximum tool age TIME2
Current tool age CUR. TIME
PLC status
Maximum tooth length LCUTS
Maximum plunge angle ANGLE
TT: Number of tool teeth CUT
HEIDENHAIN Technical Manual iTNC 530 HSCI