HEIDENHAIN iTNC 530 HSCI Technical Manual page 1704

NUMBERMP4111 =
NUMBERMP4230 =
OEMCYC.
ZIPNAME =
PALETTPRESET =
PLCCOMPCFG =
PLCDIALOG =
PLCERRFIX =
PLCERROR =
PLCERRREASON =
1704
Number of required timers > 96. The corresponding number of machine
parameters MP4111.96 to MP4111.x is created.
Input example: NUMBERMP4111 = 10
(Machine parameters MP4111.96 to MP4111.105 are created.)
Sets a number in the PLC for Module 9032. The corresponding number of
machine parameters MP4230.x is created. The maximum input value is 99; no
entry or an invalid entry defines 32 indexes.
Input example: NUMBERMP4230 = 40
(Machine parameters MP4230.0 to MP4230.40 are created.)
The possibility of machining with or without preset tables can also be used in
OEM cycles. A separate directory is created on the PLC partition for each cycle
project (PLC:\OEMCYC_ZIP\, PLC:\OEMCY2_ZIP\, etc.). In OEM.SYS, enter
after the keyword the name of the *.ZIP file to be unpacked, e.g.
OEMCYC.ZIPNAME = ABC.ZIP, OEMCY2.ZIPNAME = DEF.ZIP, etc. The *.ZIP files
contain all information for the cycles, including the directory structure. When
the control is started up, the appropriate *.ZIP files are unpacked in the folders.
The documentation for CycleDesign contains more detailed information.
Activate pallet preset table in order to manage reference points for pallets, see
page 1495
Input example: PALLETPRESET = TNC:\Palletpreset.pr
Configuration file for conditional compiling.
Input example: PLCCOMPCFG = PLC:\OEM\OEM.CFG
Name for text file with PLC dialogs; the path for the text file is permanently
defined.
Input example: PLCDIALOG = DIALOG.A
Path for "Corrective action" help text.
Input example: PLCERRFIX = FIX.A
Name for text file with PLC error messages; the path for the text file is
permanently defined.
Input example: PLCERROR = PLC_ERR.A
Path for "Cause of error" help text.
Input example: PLCERRREASON = REASON.A
HEIDENHAIN Technical Manual iTNC 530 HSCI