Table of Contents
Advertisement
DHCP server
Configuring the
DHCP/DNC server
July 2013
As of software version 60642x-03, a DHCP/DNS server can be configured and
started. This server can be used to supply the devices that are installed in the
machine network with dynamic IP addresses and to provide a name resolution
("DNS service").
The server cannot be started on the primary network interface of the MC. For
this function to be available, the MC must have at least two network interfaces
so that the server can be activated.
The server provides the following services for this interface:
DHCP service (dynamic IP address assignment)
DNS service (name resolution)
NTP service (time synchronization)
DHCP/DNS server configuration
Open the network settings of your control. The configuration dialog is
protected from unauthorized changes by the PLCPASSWORD.
Select the DHCP tab
Press the OEM authorization button or soft key
Enter the defined PLCPASSWORD or the code number 807667
10.3 Connecting the iTNC to the Network
1887
Advertisement
Table of Contents
