The Compile Function - HEIDENHAIN iTNC 530 HSCI Technical Manual

9.1.9 The COMPILE function

1682
Compiling a completed PLC program transfers it to the process memory
where it can then become active. The name of the compiled program then
appears in the main menu next to PGM IN EXEC.MEM.
The compiled PLC program is saved in the control, i.e. after confirmation of
power interruption, the PLC program need not be compiled. It is compiled
only if one of the source files has changed. A binary PLC program can be
created with PLCdesignNT for test purposes and transferred to the control.
This does not change the entry in OEM.SYS.
Soft keys within the COMPILE function:
Soft key Function
Compile current PLC program, current PLC error table, and
current soft-key project file (PLCMAIN=, PLCERRTAB=, and
SOFTKEYPROJECT= entries in OEM.SYS)
Compile only the current PLC program (PLCMAIN= entry in
OEM.SYS)
Compile only the current PLC error table (PLCERRTAB= entry in
OEM.SYS) (, see page 1176)
Compile only the current soft-key project file (entry
SOFTKEYPROJECT= in OEM.SYS), see page 1372
Compile only the current IOC file (IOCCFG= entry in OEM.SYS)
Return to PLC main menu
Soft keys within the SELECT + COMPILE function:
Soft key Function
Select and compile the configuration file for the compilation of
the source code, see page 1684
Select and compile a PLC program
Select and compile a PLC error table, see page 1176
Select and compile a soft-key project file, see page 1372
Select and compile a magazine rule file, see page 1580
Select and compile an IOC file
Return to PLC main menu
HEIDENHAIN Technical Manual iTNC 530 HSCI