Table of Contents
Advertisement
SPLCSOFTVERS =
SOFTKEYPRESS =
TABCMA =
TCHRULES =
TNCOPT.LOCK-
SOFTKEYVISIBLE =
TTYP =
July 2013
Version identifier of the SPLC program. The entry can be displayed by pressing
the MOD key and can be requested via LSV2.
Display and behavior of the CHECK and RADIO types of soft keys. If
SOFTKEYPRESS = ON is entered, the soft-key graphics and the states of the PLC
markers already change when the soft key is pressed, see page 1376.
Input example: SOFTKEYPRESS = ON
Path for compensation value tables for axis error compensation (see
"Nonlinear axis error compensation" on page 652).
Input example: TABCMA = PLC:\AXIS_COR\CORRECT.CMA
Path for the *.TCR definition file containing magazine rules for tool magazines.
Input example: TCHRULES = PLC:\RULES.TCR
After pressing the MOD key, the TNCOPT ON/OFF soft key is displayed in order
to enable commissioning on the control via TNCopt, see page 1023.
Input example: TNCOPT.LOCKSOFTKEYVISIBLE = YES
Path and file name for list of the tool types.
9.4 System Files
1707
Advertisement
Table of Contents
