HEIDENHAIN iTNC 530 HSCI Technical Manual page 1867

Hide thumbs Also See for iTNC 530 HSCI:

Table of Contents

Press the Configuration button below the interface list to open the

Configuration menu:

Interface active:

Status of the selected Ethernet interface.

Name of the interface you are currently configuring.

Plug connection:

Number of the plug connection of this interface on the logic unit of the

Here you can create or select a profile in which all settings shown in this

window are stored. HEIDENHAIN provides two standard profiles:

Settings for the standard TNC Ethernet interface, should work in a

standard company network.

Settings for the second, optional Ethernet interface; for configuration of

the machine network (available on the MC 62xx).

Press the corresponding buttons to save, load and delete profiles.

Automatically procure IP address:

The control is to procure the IP address automatically from the DHCP

Set the IP address manually:

Manually define the IP address and subnet mask. Enter as four decimal

numbers separated by points (dotted-decimal notation, for example:

160.1.180.20 and 255.255.0.0). Your network specialist determines

both addresses of the iTNC.

10.3 Connecting the iTNC to the Network