HEIDENHAIN iTNC 530 HSCI Technical Manual page 1547

Variable names:
Time management
Name Format type
HOUR int
MIN int
SEC int
DAY int
MONTH int
STR_MONTH string
YEAR2 int
YEAR4 int
Settings of the manual measuring cycles
Name Format type Description
TCH.AXIS string
TCH.PLANEROT double
TS.RAD double
TS.LEN double
TS.OFF1 double
TS.OFF2 double
TS.RINGRAD double
Results or input from the manual measuring cycles
Name Format type Description
BZ double
BEZA string
Reference point at corner, circle, 4 holes, 3 holes on a circle
Name Format type Description
BZ_HA double
BZ_NA double
LKALBEZ double
HA string
NA string
TA string
Calculated straight lines from straight-line probing
Name Format type Description
GE_HA[2] double
GE_NA[2] double
GE_WI[2] double
July 2013
Description
No. of hours from real-time clock
No. of minutes from real-time clock
No. of seconds from real-time clock
Day from real-time clock
Month as no. from real-time clock
Month as string abbr. from real-time clock
Two-digit year no. from real-time clock
Four-digit year from the real-time clock
Selected probe axis
Basic rotation angle
Calibrated probe radius
Calibrated stylus length
Calibrated center offset in reference axis
Calibrated center offset in minor axis
Radius of calibration ring
Reference point
String reference point axis
Reference point in reference axis
Reference point in minor axis
Reference point entered with calibrated probe length
Reference-axis character
Minor-axis character
Probe axis character
Straight-line axis section of reference axis
Straight-line axis section of minor axis
Straight-line angle
8.13 Touch probe
1547