HEIDENHAIN iTNC 530 HSCI Technical Manual page 1880

Hide thumbs Also See for iTNC 530 HSCI:

Table of Contents

Global settings

TeleService/IPC

verification

Enabling other VNC

VNC Focus Settings

Enabling VNC

Concurrency VNC

Manually entered VNC client

This VNC client is not permitted to connect

TeleService/IPC 61xx

VNC client via TeleService connection

Currently not yet supported. Preparation for future expansions.

Other computer that retrieves an IP address from this computer

Add new VNC viewer/client

Deletes the selected client. Possible only for clients that were

entered manually.

Edit the configuration of the selected client

Updates the display. Necessary during connection attempts

while the dialog is open.

Connection via TeleService/IPC 61xx is always permitted

The client must enter a password for verification. If this option is

active, the password must be entered when the connection is

established.

Access generally denied to all other VNC clients.

During connection attempts a corresponding dialog is opened.

Access is generally granted to all other VNC clients.

Enable focus assignment for this system. Otherwise there is no

central focus assignment. In the default setting, the focus is

actively reassigned by the owner of the focus by clicking the focus

symbol. This means that the owner of the focus must first release

the focus by clicking the focus symbol before any other client can

retrieve the focus.

In the default setting, the focus is actively reassigned by the owner

of the focus by clicking the focus symbol. This means that the

owner of the focus must first release the focus by clicking the

focus symbol before any other client can retrieve the focus.

If concurrency focus is selected, any client can retrieve the focus

at any time without having to wait for the current owner of the

focus to release it.

HEIDENHAIN Technical Manual iTNC 530 HSCI