Structure Of The Tool-Usage File - HEIDENHAIN iTNC 530 HSCI Technical Manual

Structure of the
tool-usage file
NR TOKEN TNR
0 TOOL +2
1 TOOL +3
2 TOOL +4
3 TOOL +2
4 TTOTAL +3
5 TTOTAL +4
6 TTOTAL +2
7 STOTAL +0
8 STOTAL +0
9 STOTAL +0
10 STOTAL +0
11 STOTAL +0
12 STOTAL +0
13 STOTAL +0
14 STOTAL +0
15 STOTAL +0
[END]
July 2013
The columns of the tool-usage file have the following meanings:
Column Description
Line number
NR
Tool number and index combined.
T
(e.g. '14.4' for tool 14 with index 4).
Designation for line type:
TOKEN
TOOL: Usage time per TOOL CALL; the entries are listed in
chronological order
TTOTAL: Total usage time of a tool
STOTAL: Call of a subprogram (including cycles). The entries are
listed in chronological order.
TIMETOTAL: Sum of all entries in the TIME and WTIME columns. In
the other columns this line contains the value 0.
TOOLFILE: The PATH column contains the tool table that was
active when the tool-usage file was created.
Tool number (–1: no tool inserted yet)
TNR
Tool index
IDX
Tool name
NAME
Tool-usage time in seconds
TIME
Time duration that the tool was used to machine a workpiece
(spindle on and not at rapid traverse!)
Tool-selection time in seconds
WTIME
Time duration that a tool was selected during the program. It
also includes the times where the tool was moved without M3/
M4, as well as times where it was moved at FMAX.
Tool radius R + Oversize for tool radius DR; Data from the
RAD
tool table in 1/10 µm
Line number with TOOL CALL
BLOCK
Token = TOOL: Active program or sub program
PATH
Token = STOTAL: File name of the subprogram or cycle
Example of a tool-usage file:
IDX NAME TIME
+0 MILLER2 +144
+0 DRILLER1 +7
+0 DRILLER2 +100
+0 MILLER2 +1588
+0 DRILLER1 +7
+0 DRILLER2 +100
+0 MILLER2 +1732
+0 +0
+0 +0
+0 +0
+0 +0
+0 +0
+0 +0
+0 +0
+0 +0
+0 +0
8.15 Tool changer
RAD BLOCK PATH
+60000 +4 TNC:\Stefan\Test\TOOLING.H
+30000 +9 TNC:\Stefan\Test\TOOLING.H
+40000 +11 TNC:\Stefan\Test\TOOLING.H
+60000 +14 TNC:\Stefan\Test\TOOLING.H
+30000 +0
+40000 +0
+60000 +0
+0 +0 SYS:\JHCYC\NC\252.CYC
+0 +0 SYS:\JHCYC\NC\INIT25X.CYC
+0 +0 SYS:\JHCYC\NC\PSRD25X.CYC
+0 +0 SYS:\JHCYC\NC\MILL25X.CYC
+0 +0 TNC:\Stefan\Test\DRILL.H
+0 +0 SYS:\JHCYC\NC\200.CYC
+0 +0 TNC:\Stefan\Test\DRILL2.H
+0 +0 SYS:\JHCYC\NC\205.CYC
+0 +0 SYS:\JHCYC\NC\251.CYC
1599