The Table Function - HEIDENHAIN iTNC 530 HSCI Technical Manual

9.1.6 The TABLE function

1676
From the main menu, choose the TABLE soft key to select the table of the
PLC memories in order to show their states dynamically on the screen. To
select a certain operand, use the cursor keys or the GOTO key. Press the END
key to return to the main menu.
Within the TABLE function, you can navigate with the appropriate soft keys,
or with the m, i, o, c, t, b, w, d and s keyboard keys for each operand type. The
b, c, and d keys are an exception in the B, W, D and HEX views, since they are
needed for the entry of hexadecimal values.
In the TABLE function the first two symbols (in alphabetical order) are
displayed in the table if in the symbol definition more than one symbol is
assigned to the PLC operand through the /c switch.
Soft key Function
Set the selected operand
Reset the selected operand
Show a list of the markers
Show a list of the inputs
Show a list of the outputs
Show a list of the counters
Show a list of the timers
Show a list of the bytes
Show a list of the words
Show a list of the double words
HEIDENHAIN Technical Manual iTNC 530 HSCI