Module 9342 Find Magazine And Pocket Number - HEIDENHAIN iTNC 530 HSCI Technical Manual

July 2013

Module 9342 Find magazine and pocket number

Module 9342 determines the magazine and pocket number from the tool
number. The module takes the RSV column of the pocket table into account if
magazine rules are in effect. If the module is used to find reserved pockets, it
returns the first reserved pocket with ascending magazine number. However,
further pockets can be reserved. In this case the search must be repeated with
another "start magazine for the search" command.
Call:
PS B/W/D/K <Tool number>
PS B/W/D/K <Mode>
0: Look for occupied pocket
1: Look for reserved pocket
PS B/W/D/K <Start magazine for the search>
CM 9342
PL B/W/D/K <Magazine number>
–1: Magazine could not be found
PL B/W/D/K <Pocket number>
–1: Pocket could not be found
Error code:
Marker Value Meaning
M4203 0 Magazine and pocket number found
1 Error code in W1022
W1022 1 Invalid mode
2 Invalid start magazine for the search
20 Module was not called in a spawn or submit job
30 Tool not found
36 File error in pocket table
8.15 Tool changer
1587