HEIDENHAIN iTNC 530 HSCI Technical Manual page 1878

Hide thumbs Also See for iTNC 530 HSCI:

Table of Contents

Screen button /

Expert Options

Remove the selected network drive from the list.

Copy the data of the selected network drive and insert it in the list as a new entry.

Edit the settings of the selected network drive (see Add).

The Status Log window provides various information during the connection of a

network drive. This information assists you in troubleshooting if a network drive

cannot be connected, for example.

The following screen buttons are available in the Status Log window:

Delete the contents of the Status Log window.

The following screen buttons are available in the Mount Setup window:

Accept the changes and exit the network settings.

Load the changes.

Exits the network settings. The changes made are discarded.

Select whether the drive is to be connected automatically during

control start-up if a network connection exists.

These settings are only intended for your network specialists.

Summary of the settings made.

Please check the settings before saving them with the Apply

button. You can later change the settings using the Edit button.

HEIDENHAIN Technical Manual iTNC 530 HSCI