NC programming | Program section code
TURRET / MAGAZINE section
The TURRET or MAGAZINE program section defines the
assignment of the tool carrier. For every assigned pocket, the tool
ID number is entered. For multipoint tools, every cutting edge is
entered in the turret list.
If you do not program the TURRET or MAGAZINE, the
tools entered in the tool list of the Machine operating
mode will be used.
Example: Turret table
. . .
TURRET
T1 ID"342-300.1"
T2 ID"C44003"
. . .
Example: Magazine table
. . .
MAGAZINE
ID"342-300.1"
ID"C44003"
. . .
HEIDENHAIN | User's Manual smart.Turn and DIN Programming | 12/2017
1
63