Appendix 2 Error Messages - YOKOGAWA WT3000 User Manual

Appendix 2 Error Messages

Error in Communication Command (100-199)
Code Messages
102 Syntax error
103 Invalid separator
104 Data type error
108 Parameter not allowed
109 Missing parameter
111 Header separator error
112 Program mnemonic too long
113 Undefined header
114 Header suffix out of range
120 Numeric data error
123 Exponent too large
124 Too many digits
128 Numeric data not allowed
131 Invalid suffix
134 Suffix too long
138 Suffix not allowed
141 Invalid character data
144 Character data too long
148 Character data not allowed
150 String data error
151 Invalid string data
158 String data not allowed
App-2
This section explains the communication error messages.
• The messages can be displayed in English or Japanese on the WT3000. However, if
a messages is queried with the :STATus:ERRor? command and displayed on a PC,
the message is displayed in English.
• If servicing is required, contact your nearest YOKOGAWA dealer for repairs.
• Only error messages related to communications are listed here. For other error
messages, see User's Manual IM760301-01E .
Corrective Action
Invalid syntax.
Use a comma to separate the data.
See pages 5-5 and 5-6 and write using the
correct data form.
Check the number of data points.
Enter the required data.
Use a space to separate the header and data.
Check the mnemonic (alphanumerical character
string).
Check the header.
Check the header.
A number is required in the <NRf> form.
Use a smaller exponent for <NR3> format.
The value must be less than equal to 255 digits.
Enter in a format other than <NRf> format.
Check the unit of the <Voltage>, <Current>,
<Time>, and <Frequency>.
Check the unit of the <Voltage>, <Current>,
<Time>, and <Frequency>.
No units are allowed other than <Voltage>,
<Current>, <Time>, and <Frequency>.
Select character data from the selections
available in {...|...|...}.
Check the spelling of the character strings in
{...|...|...}.
Write in a data form other than {...|...|...}. Chapter 6
Enclose <String> in double quotation or single
quotation marks.
<String> is too long or contains characters which Chapter 6
cannot be used.
Enter in a data format other than <String>.
Page
Chapter 5, 6
5-1
5-5 and 5-6
5-5,
chapter 6
5-5,
chapter 6
5-1
Chapter 6
Chapter 6
Chapter 6
5-5
5-5,
chapter 6
5-5,
chapter 6
5-5,
chapter 6
5-5
5-5
5-5
Chapter 6
Chapter 6
5-6
Chapter 6
IM 760301-17E