6.16 System Group - YOKOGAWA WT310EH User Manual

6.16 SYSTem Group

The commands in this group deal with the system. You can make the same settings and queries that you can by
pressing the UTILITY key on the front panel and then using the inFo or rESo menu or by pressing the KEY PROTECT
or INTERFACE key.
:SYSTem?
Function Queries all system settings.
Syntax
:SYSTem?
:SYSTem:MODel?
Function Queries the model code.
Syntax
:SYSTem:MODel?
Example :SYSTEM:MODEL?
-> :SYSTEM:MODEL "WT310E"
Description Returns the Model item of the Utility -> Info menu.
:SYSTem:SUFFix?
Function Queries the suffix code.
Syntax
:SYSTem:SUFFix?
Example :SYSTEM:SUFFIX?
-> :SYSTEM:SUFFIX "-C1-D/C7/EX1/G5/
DA4"
Description Returns the Suffix item string of the Utility -> Info
menu.
:SYSTem:SERial?
Function Queries the serial number.
Syntax
:SYSTem:SERial?
Example
:SYSTEM:SERIAL?
-> :SYSTEM:SERIAL "123456789A"
Description Returns the No. item string of the Utility -> Info
menu.
:SYSTem:VERsion[:FIRMware]?
Function Queries the firmware version.
Syntax
:SYSTem:VERsion[:FIRMware]?
Example :SYSTEM:VERSION:FIRMWARE? -> "1.01"
Description Returns the Ver. item string of the Utility -> Info
menu.
:SYSTem:KLOCk
Function Sets or queries the on/off state of the key
protection.
Syntax
:SYSTem:KLOCk {<Boolean>}
:SYSTem:KLOCk?
Example :SYSTEM:KLOCK OFF
:SYSTEM:KLOCK? -> :SYSTEM:KLOCK 0
IM WT310E-17EN
:SYSTem:RESolution
Function Sets or queries the numeric data display
resolution.
Syntax
:SYSTem:RESolution {<NRf>}
:SYSTem:RESolution?
<NRf> = 4 , 5 (digit)
Example :SYSTEM:RESOLUTION 5
:SYSTEM:RESOLUTION?
-> :SYSTEM:RESOLUTION 5
:SYSTem:COMMunicate:COMMand
Function Sets or queries the command type.
Syntax
:SYSTem:COMMunicate:COMMand
{WT300E|WT300|WT200}
:SYSTem:COMMunicate:COMMand?
Example :SYSTEM:COMMUNICATE:COMMAND WT300E
:SYSTEM:COMMUNICATE:COMMAND?
-> :SYSTEM:COMMUNICATE:COMMAND WT300E
:SYSTem:COMMunicate:ETHernet:
MACaddress?
Function Sets or queries the Ethernet MAC address.
Syntax
:SYSTem:COMMunicate:ETHernet
:MACaddress?
Example :SYSTEM:COMMUNICATE:ETHERNET
:MACADDRESS?
-> :SYSTEM:COMMUNICATE:ETHERNET:
MACADDRESS "000064_809_413"
Description This command is only valid on models with the
Ethernet interface (/C7) option.
1
2
3
4
5
6
7
8
9
App
Index
6-33