Configuring The Ethernet Settings Of This Instrument - YOKOGAWA WT310EH User Manual

4.4 Configuring the Ethernet Settings of This
Instrument
This section explains the following setting for remotely controlling this instrument via the Ethernet
interface:
Procedure
Follow the procedure indicated by the thick lines in the following menu.
Select Ethernet.
1.
2.
Select IP address.
8.
Select subnet mask.
16.
Select default gateway.
24.
Select to apply the settings.
32.
4-4
(Display B)
3.
(Display B)
9
.
(Display B)
17
.
(Display B)
25
.
(Display B)
33
.
Select DHCP.
5
(Display B) .
4.
Set the IP address.
12
(Display C)
.
10.
Press and to set the number.
11.
Press to move the digit.
Set the subnet mask.
20
(Display C)
.
18.
Same as step 10 and 11
19.
Set the default gateway.
28
(Display C) .
26.
Same as step 10 and 11
27.
Apply the settings.
34
(Display C) .
7
(Display C) .
6.
Confirm the setting.
7
.
Set the IP address.
15
(Display D) .
13.
Same as step 10
14.
and 11
Set the subnet mask.
23
(Display D) .
21.
Same as step 10 and 11
22.
Set the default gateway.
31
(Display D) .
29.
Same as step 10 and 11
30.
35.
Close menu.
8.
Close menu.
(User settings)
IM WT310E-17EN