Table of Contents
Advertisement
2.3
Configuring the Ethernet Interface
Procedure
IM 04P01B01-17E
Set the host name and IP address of the recorder. You do not have to set the DNS
(domain name system).
Setup Items
Ethernet
Host
Local IP
DNS
End
For a description of the basic setup operations, see "Basic Key Operations" on page vi.
Entering Basic Setting Mode
Hold down the
key for 3 seconds to display the Setting mode screen.
MENU
Next, hold down both the
display the Basic Setting mode screen.
Note
To cancel an operation, press the ESC key.
Host Name and Domain Name
1.
Press the
key to select Ethernet and then press the
Basic=Ethernet
2.
Press the
key to select Host and then press the
Ethernet=Host
3.
Set the host name of the recorder and then press the
Key operations
• Use the
key to select the digit for entering a character.
• Use the CHARACTER key to select the character type.
• Use the
key to select the character you wish to enter.
Host=
4.
Set the domain name and press the
The setting complete screen appears.
Domain=
Ethernet host
Setting complete
5.
Press the ESC key to return to the higher level menu. To save the settings and
exit from Basic Setting mode, proceed to "Saving the Settings."
* When the
key,
key, or
the operation is reversed as when the respective key is pressed by itself.
Host
Domain
Host name
Domain name
A
M
IP address
Subnet mask
DNS
P
DNS On/Off
Server
(primary)
Suffix_S
Suffix_P
Domain suffix
Domain suffix
(primary)
(secondary)
(
) key and the
(
DISP
FUNC
key in the same fashion as in step 3.
CHARACTER
key is pressed while holding down the SHIFT key,
G
Default gateway
S
Server
(secondary)
) key for 3 seconds to
key.
key.
key.
2-3
2
Hide quick links:
Advertisement
Table of Contents
