Siemens SINUMERIK 840D sl Operating Manual page 235

Procedure
Help screens
Help with selection of parameter F, for example.
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
Note
A multi-edge with more than two edges is traversed helically; with a single or double
edge, each edge is machined separately.
1. Select the part program to be edited in the "Program manager"
operating area.
2. Press the "Open" softkey or the "INPUT" key to edit the part program
in the editor.
3. Press the "Milling" softkey.
4. Press the "Multi-edge spigot" and "Multi-edge" softkeys.
The "Multi-edge" input window opens.
Programming a cycle
4.7 Milling
235