Siemens SINUMERIK 840D sl Operating Manual page 173

Procedure
Help screens
Help with selection of the "line" position
pattern parameter.
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
1. Select the part program to be edited in the "Program manager"
operating area.
2. Press the "Open" softkey or the "INPUT" key to edit the part program
in the editor.
3. Press the "Drilling" softkey.
4. Press the "Positions" and "Line" softkeys.
The "Position Pattern" input window opens.
Help with selection of the "grid" position
pattern parameter.
Programming a cycle
4.4 Drilling
173