Displaying Program User Data (Pud); Searching For User Data - Siemens SINUMERIK 840D sl Operating Manual

5.6

Displaying program user data (PUD)

Program-global user data
PUDs are global part program variables (Program User Data). PUDs are valid in all main
programs and subroutines, where they can also be written and read.
Proceed as follows
5.7

Searching for user data

You can search for R parameters and user data.
Procedure
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
1. Select the "Parameter" operating area.
2. Press the "User variable" softkey.
3. Press the "Program PUD" softkey.
1. Select the "Parameter" operating area.
2. Press the "R parameters", "Global GUD", "Channel GUD", "Local
GUD" or "Program PUD" softkeys to select the list in which you would
like to search for user data.
3. Press the "Search" softkey.
The "Search for R Parameters" or "Search for User Data" window
opens.
4. Enter the desired search term and press "OK".
The cursor is automatically positioned on the the R parameter or user
data you are searching for, if they exist.
5.6 Displaying program user data (PUD)
User data
271