Siemens SINUMERIK 840D sl Operating Manual page 323

Closing the program
Note
A program does not have to be closed in order for it to be executed.
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
Press the ">>" and "Exit" softkeys to close the program and editor again.
- OR -
If you are at the start of the first line of the program, press the "Cursor left"
key to close the program and the editor.
To reopen a program you have exited with "Close", press the "Program" key.
Program management
8.2 Opening and closing the program
323