Siemens SINUMERIK 840D sl Operating Manual page 41

Calling a topic in the table of contents
Searching for a topic
HMI sl Turning
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
1. Press the "Table of contents" softkey.
Depending on which technology you are using, the "HMI sl Milling",
"HMI sl Turning" or "HMI sl Universal" Operating and Commissioning
Manuals as well as the "Programming" Manual are displayed.
2. Select the desired manual with the "Cursor down" and "Cursor up"
keys.
3. Press the "Cursor right" or "Input" key or double-click to open the book
and the section.
4. Navigate to the desired topic with the "Cursor down" key.
5. Press the "Follow reference" softkey or the <Input> key to display the
help page for the selected topic.
6. Press the "Current topic" softkey to return to the original help.
1. Press the "Search" softkey.
The "Search in Help for: " window appears.
2. Activate the "Full text " checkbox to search in all help pages.
If the checkbox is not activated, a search is performed in the table of
contents and in the index.
3. Enter the desired keyword in the "Text" field and press the "OK"
softkey.
If you enter the search term on the machine control panel, replace an
accented character with an asterisk (*) as dummy.
All entered terms and sentences are sought with an AND operation. In
this way, only documents and entries that satisfy all the search criteria
are displayed.
4. Press the "Keyword index" softkey if you only want to display the
index of the operating and programming manual.
Introduction
1.4 User interface
41