Siemens SINUMERIK 840D sl Operating Manual page 18

Introduction
1.2 Operator panel fronts
Key
18
Function
Cursor
Input focus/cursor between different fields. Navigate rows or characters.
Use the right cursor to open a directory or program in the editor.
Use the left cursor to switch to a higher level in the directory tree.
SELECT
Choose one of a number of options presented.
Select an element.
END
Moves the cursor to the last input field in a parameterization screen form or
table.
BACKSPACE
Delete the value in the input field.
In insertion mode, it deletes the character after the cursor.
TAB
Indent the cursor by several characters.
SHIFT
Press the Shift key to enter the upper character shown on the dual input keys.
CTRL
Use the following key combinations to navigate in the G code editor:
<Ctrl + Home> : Jump to the beginning.
•
<Ctrl + End> : Jump to the end.
•
Selection
ALT
Irrelevant
DEL
Delete the value in the input field.
•
In insertion mode, it deletes the character after the cursor.
•
INSERT
Activate insertion mode.
INPUT
Finish the entry of a value in the input field.
•
Open a directory or program.
•
ALARM - only OP 010 and OP 010C
Irrelevant
PROGRAM - only OP 010 and OP 010C
Irrelevant
OFFSET - only OP 010 and OP 010C
Irrelevant
PROGRAM MANAGER - only OP 010 and OP 010C
Irrelevant
Menu back key
Jump to the next highest menu level.
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
HMI sl Turning